Teledyne DALSA introduces its next generation family of frame grabbers for high-performance image acquisition

New Xtium2-CLHS frame grabbers deliver faster data rates on long fiber cables with built-in repeaters for distributed image processing without affecting CPU performance

WATERLOO, Ontario, Oct. 24, 2018 (GLOBE NEWSWIRE) — Teledyne DALSA, a Teledyne Technologies company and global leader in machine vision technology, is pleased to announce the next generation high-performance family of frame grabbers – the Xtium2 for the PCIe Gen3 platform. The Xtium2 family starts with the introduction of two new models of frame grabber boards featuring AIA’s Camera Link HS® interface: the Xtium2-CLHS PX8 and Xtium2-CLHS FX8. The series will also provide support to upcoming and existing interfaces like CoaXPress® (ver 2.0) and Camera Link.

The Xtium2-CLHS PX8 features 7-lanes operating at 10 Gbit/s using CLHS X-Protocol and can deliver host transfer bandwidth in excess of 6.8 GByte/s. The Xtium2-CLHS PX8 supports a CX4 connector that is Active Optical Cables (AOC) ready. The AOC cables use fiber cable to deliver cable lengths greater than 15 meters.

The Xtium2-CLHS FX8 supports up to four bidirectional SPF+ modules to deliver up to 4.0 GByte/s of image acquisition and host transfer speeds of up to 6.8 GByte/s. The low cost SPF+ module and fiber optic cables help extend cable lengths to 100 meters. In addition, the Xtium2-CLHS FX8 is capable of supporting multiple independent CLHS cameras.

“The next generation of Xtium2 frame grabbers are designed to meet the data throughput and cable length requirements of the new high-speed, high-resolution cameras with CameraLink HS and CoaXPress interfaces. The Xtium2 series simplifies downstream image processing with its on-board, real-time processing with no CPU usage. While performance remains at the heart of the design, reliability and lower system cost are key deliverables for these products,” said Senior Product Manager, Inder Kohli.

When combined with cutting-edge color, and multispectral line scan cameras like the new Linea ML, the Xtium2-CLHS frame grabbers enable the newest and most demanding vision applications.

Xtium2-CLHS Key Features:

  • Longer cable distance beyond 15 meters at max data rate without sacrificing performance
  • Distributed Processing using Data-Forwarding at max input data rates
  • The Xtium2-CLHS series is comprised of two boards:
    •   Xtium2-CLHS PX8 uses CX4  connector which is ready for Active Optical Cables (AOC)
    •   Xtium2-CLHS FX8 uses 4 SFP+ slots for scalable solution
  • Synchronized acquisition from multiple independent cameras
  • Hi-Dynamic Range imaging with Multi-plane support
  • Real-time on-board process delivers ready to use pixel formats to reduce processing time
  • Supports CLHS X-protocol delivering 97% data-transfer efficiency
  • High reliability with advanced meta data
  • Fully supported by free Sapera LT SDKs

Please visit the Xtium2 product page for more information. For sales enquiries, visit our contact page, and for full resolution images, our online media kit.

About Teledyne DALSA
Teledyne DALSA is an international technology leader in sensing, imaging, and specialized semiconductor fabrication. Our image sensing solutions span the spectrum from infrared through visible to X-ray; our MEMS foundry has earned a world-leading reputation. In addition, through our subsidiaries Teledyne Optech and Teledyne CARIS, we deliver advanced 3D survey and geospatial information systems. Teledyne DALSA employs approximately 1400 employees worldwide and is headquartered in Waterloo, Canada. For more information, visit www.teledynedalsa.com.

About Teledyne Imaging
Teledyne DALSA is a company aligned under the Teledyne Imaging umbrella. With unrivalled expertise across the spectrum and decades of experience, Teledyne Imaging companies offer best-in-class products and technology, and together, provide the deepest, widest image sensing technology portfolio on the planet. For more information, visit www.teledyneimaging.com.

All trademarks are registered by their respective companies.
Teledyne DALSA reserves the right to make changes at any time without notice.

Media Contact:
Geralyn Miller
Senior Manager, Global Media Relations
Tel: +1-519-886-6001 ext. 2187
Email: geralyn.miller@teledyne.com

Sales Contacts:
Sales.americas@teledynedalsa.com
Sales.europe@teledynedalsa.com
Sales.asia@teledynedalsa.com

A photo accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/68a2a3a8-96c1-4f87-87dd-5683744fbf2d

Related Posts